P/N VT-CANPOD-52A

Vato Tuned CAN-Pod

10,235.00TL
Display
466 × 466 round OLED touch screen, Ø43.8 mm visible
Data
CAN bus (125 to 1000 kbit/s), OBD2, or the ECU over WiFi
Suits
Any 52 mm gauge pod or a 52 mm panel hole. Any ECU that broadcasts on CAN.
Includes
Gauge, 2 m wiring harness, mounting bracket, 2 × M4 thumbscrews

NOTE

For off-road and race use only.

Gauge overview

A round 52 mm OLED touch screen gauge that reads your ECU's CAN broadcast, OBD2, or the ECU itself over WiFi. Show up to four values per screen and swipe between up to eight screens.

Set it up from your phone. The gauge makes its own WiFi network and serves a setup page, so there is no software to install. Load your ECU's DBC file and pick signals from a list, or enter a CAN ID, start bit and scale by hand.

  • DBC import fills in CAN ID, start bit, length, byte order, scale and offset for you
  • Up to 32 signals from OBD2 PIDs or raw CAN, shown as arc, needle or text widgets
  • Alarms per widget, with a threshold, blink and up to 4 colour zones
  • Four wires power, ground, CAN H and CAN L
Setup page: Edit Signal with a signal picked from Import from DBC. The fields below it fill in from the file.
Setup pageEdit Signal with a signal picked from Import from DBC. The fields below it fill in from the file.